Salty Boater Salt Away For Boats

• The most effective salt removal solution for fishing tackle, dive gear, railings, decks, boat trailers, winter vehicles & more.
  
  
• Boat wash salt removal washes deposits from fiberglass decks, vinyl, painted surfaces, aluminum, chrome, stainless steel, magnesium, plastic, wood, glass & rubber.

• Salts removal for boats will not remove ceramic coatings, wax or polish, won't cause streaks, items can be completely immersed to remove salt deposits.

• Also works great as a marine boat motor flush, salt remover for jet ski removing salty deposits from outboard and inboard engines.

• Winter Is Here – Road salt gradually corrodes your vehicle's paint, wheels, and undercarriage. Give your car cleaning a boost to remove harmful salt particles and keep your car protected against premature aging and damage

• Salty Boater works great as a car wash with lubricating agent just wear gloves.  Designed Foam Cannon, Wash Bucket our Pressure Washer. Just spray on for 30 sec and wash off.

Why Choose Salt Remover For Boats

1. Cleaning and Washing:

   • Rinse the boat thoroughly with fresh water to remove salt residue.
   • Clean the exterior and interior surfaces to prevent the buildup of salt, which can be corrosive over time.

2. Engine Flush:

   • If your boat has an inboard or outboard motor, it's a good idea to flush the engine with fresh water to remove any saltwater from the cooling system.

3. Protective Coating:

   • Apply a protective coating, such as wax or polish, to the boat's exterior to create a barrier against salt, UV rays, and other environmental elements.

4. Rust Prevention:

   • Lubricate metal parts, including hinges, nuts, bolts, and other hardware, to prevent rust and corrosion.

5. Interior Maintenance:

   • Ensure that the interior of the boat is dry before storing. Moisture inside the boat can lead to mold and mildew.

6. Covering:

   • If your boat will be stored outdoors, consider using a boat cover to protect it from the elements.

7. Fuel Stabilization:

   • If the boat will be unused for an extended period, consider adding a fuel stabilizer to the gas tank to prevent fuel deterioration.

8. Bilge Maintenance:

   • Clean the bilge to remove any accumulated saltwater, debris, or oil.

Using a salt remover for boats is essential to prevent the negative effects of saltwater exposure, particularly in marine environments. Saltwater is corrosive, and if not properly addressed, it can cause damage to various components of a boat. Here are some reasons why using a salt remover is important:

1. Corrosion Prevention: Saltwater can accelerate the corrosion of metal parts on a boat, such as the engine, hardware, and other components. Regularly removing salt deposits helps prevent corrosion and extends the lifespan of these parts.

2. Protecting Paint and Surfaces: Salt can damage the paint and other surfaces of a boat. Over time, the corrosive nature of saltwater can lead to discoloration, fading, and deterioration of the boat's finish. Salt removers help protect and preserve the appearance of the boat.

3. Maintaining Performance: Salt buildup on the boat's hull and propeller can negatively impact its performance. Removing salt deposits helps maintain the efficiency of the hull and propeller, ensuring optimal speed and fuel efficiency.

4. Preventing Blockages: Salt deposits can accumulate in various systems, including the cooling system of the engine and the bilge pump. Removing salt helps prevent blockages and ensures these systems function properly.

5. Preventing Electrical Issues: Saltwater is conductive and can lead to electrical issues if it comes into contact with sensitive electrical components on the boat. Removing salt reduces the risk of electrical problems.

6. Preserving Resale Value: Regular maintenance, including salt removal, helps preserve the overall condition and appearance of the boat. This can be crucial when it comes to maintaining or even enhancing the resale value of the vessel.

7. Ensuring Safety: Corrosion and damage caused by salt buildup can compromise the structural integrity of a boat. Regular salt removal is essential for maintaining the safety of the vessel and its occupants.

When using a salt remover for boats, it's important to choose products that are specifically designed for marine applications. These products are formulated to break down and remove salt deposits effectively without causing harm to the boat's surfaces or the environment. Always follow the manufacturer's instructions for proper use and application.

How Often Should I use Salty Boater Salt Away For Boats

The frequency with which you should use a salt remover on your boat depends on several factors, including how often you use the boat, the type of water (saltwater or freshwater) it's exposed to, and the specific conditions of use. Here are some general guidelines to help you determine how often to use a salt remover:

1. After Each Saltwater Use:

   • If you frequently take your boat into saltwater, it's a good practice to rinse and use a salt remover after each use. Saltwater is corrosive, and the sooner you remove the salt deposits, the better you can protect your boat from corrosion.

2. Regular Maintenance Schedule:

   • For boats used in saltwater environments, consider incorporating salt removal into your regular maintenance routine. This could mean rinsing and using a salt remover every few weeks or on a monthly basis, depending on usage patterns.

3. Off-Season Storage:

   • If you store your boat during the off-season or for an extended period, thoroughly clean and use a salt remover before storing it. This ensures that the boat is protected from salt corrosion during its idle period.

4. Inspect and Clean as Needed:

   • Regularly inspect your boat for salt deposits and clean as needed. If you notice salt buildup on surfaces, it's a sign that you should use a salt remover.

5. Boat Type and Materials:

   • Consider the materials used in your boat. Some materials may be more resistant to salt corrosion than others. Fiberglass, stainless steel, and aluminum are commonly used in boats and have varying degrees of resistance to salt damage.

6. Follow Manufacturer Recommendations:

   • Refer to the owner's manual or guidelines provided by the boat manufacturer. They may provide specific recommendations for maintenance, including how often to use a salt remover.

Remember that these are general guidelines, and the specific conditions in which you use your boat may influence the frequency of salt removal. If you're uncertain, consult with the boat manufacturer or a marine maintenance professional for personalized advice based on your boat's materials, usage patterns, and local environmental conditions.

Salty Boater Salt Away Boat Engine Flush

Engine flushing with a salt remover is a crucial maintenance step for boats that operate in saltwater environments. Saltwater can be corrosive, and the engine's cooling system, which uses seawater for cooling, is particularly susceptible to salt buildup. Flushing the engine with a salt remover helps remove salt deposits and prevents corrosion. Here's how you can perform an engine flush with a salt remover:

1. Materials Needed:

   • Salt remover specifically designed for marine engines.
   • Freshwater source (hose or bucket).
   • Muffs or a flushing attachment compatible with your engine.

2. Prepare the Boat:

   • Ensure the boat is securely docked or on a trailer.
   • Make sure the engine is turned off.

3. Connect Flushing Device:

   • If your boat has an outboard motor, use muffs or a flushing attachment to connect the freshwater source to the engine's water intake. For inboard motors, follow the manufacturer's recommendations for using a flushing kit.

4. Mix Salt Remover:

   • Follow the instructions on the salt remover product to mix it with water if required.

5. Start Flushing:

   • Turn on the freshwater source.
   • Start the engine and let it run at idle speed.
   • Slowly introduce the salt remover mixture into the freshwater supply.

6. Run Engine:

   • Allow the engine to run for the recommended time specified by the salt remover product. This is typically a few minutes.

7. Monitor Temperature:

   • Keep an eye on the engine temperature to ensure it stays within the normal operating range. Flushing should not cause the engine to overheat.

8. Shut Down and Rinse:

   • After the recommended flushing time, turn off the engine.
   • Disconnect the flushing device.
   • Rinse the engine and surrounding areas with freshwater to remove any remaining salt residue.

9. Inspect and Lubricate:

   • Inspect the engine for any signs of salt buildup or corrosion.
   • Lubricate moving parts and apply corrosion inhibitors as recommended by the engine manufacturer.

10. Repeat as Needed:

    • Depending on usage and exposure to saltwater, repeat the flushing process regularly, especially after each saltwater use.

Always follow the specific instructions provided by the salt remover product and the engine manufacturer. Regular engine flushing with a salt remover is a proactive measure to protect your boat's engine and extend its lifespan, particularly in saltwater environments.